Safe all around

AUTOCHECK
Every 2 months, impor­tant system compo­nents - such as water meters, brine meters or elec­tronic compo­nents - are auto­mat­i­cally checked.

STATUS MESSAGE
The status display provides infor­ma­tion on the unit or online as to whether there is a malfunc­tion (lights up red) or whether regen­er­a­tion agent must be refilled (lights up yellow).

AQA WATCH
This allows the water supply to the domestic water network to be moni­tored. A warning message is issued in the event of perma­nently low volume flows (< 60 l/h over a period of > 10 minutes).

AQA SAFE FUNC­TION
Prevents water damage caused by flushing water in the event of a power failure. In an emer­gency, the waste water valve closes, the control valves remain in the respec­tive oper­ating state and programmed para­me­ters are perma­nently stored. Partic­u­larly impor­tant when using flush water lifting systems.

AQA STOP*
Control valves and motor inter­sec­tion close and shut off the water instal­la­tion in the direc­tion of flow after the BWT Perla and provide safety with wired floor sensor.

AQA STOP LITER
Provides safety by moni­toring and limiting water volume. Program­mable to water volume to be deter­mined on site with unin­ter­rupted flow.

_{*not with BWT Perla One, optional acces­sory}

How to activate the AQA Guard